Specifications

ES10 Page 71/100
Document status: Released Operating Manual rev. 07, 25.09.13
Warning Flags
Flag Description
OUTPUT_PWR_LOW_WARNING
Optical output power is lower than the warning limit
LASER_HIGH_WARNING The laser current of one laser is higher than the warning limit (> 130%)
TEC_HIGH_WARNING The peltier current of one laser is higher than the warning limit (< 90%)
RF_INPUT_LOW_WARNING
RF signal is lower than the warning limit
POWER_SUPPLY_WARNING One of two power supplies fails (obsolete)
FAN_LEFT_WARNING The left fan (looking from device’s front side) fails (doesn’t rotate)
FAN_RIGHT_WARNING The right fan (looking from device’s front side) fails (doesn’t rotate)
OUTPUT_PWR_HIGH_WARNING
Optical output power is higher than the warning limit
RF_INPUT_HIGH_WARNING
RF signal is higher than the warning limit
POWER_SUPPLY_LEFT_WARNING The left power supplies (looking from device’s front side) fails
POWER_SUPPLY_RIGHT_WARNING The right power supplies (looking from device’s front side) fails
OMI_OR_RFGAIN_LOW_WARNING
The calculated rf gain (if AGC on) or the calculated omi (if AGC off) is
lower than the warning limit
OMI_OR_RFGAIN_HIGH_WARNING
The calculated rf gain (AGC on) or the calculated omi (AGC off) is higher
than the warning limit
+3.3V_LOW_WARNING Supply +3.3V is lower than the warning limit
+3.3V_HIGH_WARNING Supply +3.3V is higher than the warning limit
+5V_LOW_WARNING Supply +5V is lower than the warning limit
+5V_HIGH_WARNING Supply +5V is higher than the warning limit
-5V_LOW_WARNING Supply -5V is lower than the warning limit
-5V_HIGH_WARNING Supply -5V is higher than the warning limit
+12V_LOW_WARNING Supply +12V is lower than the warning limit
+12V_HIGH_WARNING Supply +12V is higher than the warning limit
-12V_LOW_WARNING Supply -12V is lower than the warning limit
-12V_HIGH_WARNING Supply -12V is higher than the warning limit
+24V_LOW_WARNING Supply +24V is lower than the warning limit
+24V_HIGH_WARNING Supply +24V is higher than the warning limit
LASER_TEMP_DIFF_LOW_WARNING Laser temperature difference from nominal value is lower than the warning
limit (≥ 1°C below nominal value)
LASER_TEMP_DIFF_HIGH_WARNING Laser temperature difference from nominal value is higher than the
warning limit (≥ 1°C above nominal value)
MODULE_TEMP_LOW_WARNING Module temperature is lower than the warning limit (< 5°C)
MODULE_TEMP_HIGH_WARNING Module temperature is higher than the warning limit (> 65°C)
Table 6. Situations triggering a warning flag in the ES10; Flags in bold letters can be controlled
via the limits menu (ref. to 6.6)