Specifications

ES10 Page 5/100
Document status: Released Operating Manual rev. 07, 25.09.13
4.3 Operating Conditions 38
4.3.1 Optical output signal 38
4.3.2 Applying an appropriate RF input signal 38
4.3.3 AGC Modes 40
4.3.4 Adjusting Regulation Mode 41
4.3.5 ITU Frequency Adjustments in DWDM Applications (XL only) 41
4.3.6 Optical Power On /Off 41
4.3.7 SBS suppression setting (XL only) 41
4.4 Push Button / LCD Display 43
4.5 LED Alarm and Warning Messages 45
5 CONTROLLING A NEC 48
5.1 Communicating with the NEC 49
5.2 Devices Update 51
5.3 Configure Slots (optionally) 52
5.4 Server Properties 53
5.5 Event Log 54
5.6 Statistics 55
5.7 General Purpose I/O Ports of NEC Server (Option) 56
5.7.1 Examples of I/O port status information 59
5.8 Server Administration 60
5.9 SNMP Configuration 60
5.10 Server Update 64
5.11 Config Save 65
5.12 Config Restore 67
6 CONTROLLING ES10 VIA A NEC 69
6.1 Status 69
6.2 Alarm and Warning Messages in the Status Page 70
6.3 Parameters 72
6.4 Internal Voltages 73
6.5 Settings Menu 74
6.5.1 Changing SBS Threshold 75
6.5.2 Changing SBS Fiber Type and SBS Fiber Length 76
6.5.3 Changing OMI
totrms
(AGC on mode only) 77
6.5.4 Setting Gain (AGC off mode only) 78
6.5.5 Changing AGC Mode 79
6.5.6 Setting Slope 80
6.5.7 Changing ITU Laser Frequency 81
6.5.8 Changing Optical Output Power Mode 82
6.5.9 Changing Regulation Mode 83
6.5.10 Changing Redundancy Mode 84