Specifications

ES10 Page 100/100
Document status: Released Operating Manual rev. 07, 25.09.13
The manual removal of “unconnected” devices via the “Remove” button is improved.
3.0.3 Nov 2009 - Bugfix DS55 SAT transmitter – the SAT-OMI and SAT-RF gain alarm limits could not be
modified.
3.0.4 Jan 2010 - Bugfix for bootloader software update of the old Net+50 processor in the Application
Software Release 3.0.x. Using 3.0.x. an error message occurred after the bootloader
update. Nevertheless the new bootloader was correctly installed. The error message is
removed
3.0.5 May 2010 - Bugfix SNMP “Trap Verify” Feature”; activation of the “Trap Verify” Feature” was causing a
blocking of the TCP/IP stack and the LAN interface was not responding anymore. After
some minutes the NECE was initiating a watchdog reset.
3.1.0 Oct 2010 Support of new devices BFE1000, BOR4085, ECE-FA
3.1.1 Jan 2011 - Bugfix BOR4160 / BOR4085 – masking of alarm and SNMP properties modified
3.1.2 Feb 2011 - Bugfix DS26 transmitter -- RF input alarm could not be modified by LCD display
3.1.3 June 2011 - Integration of USB interface
3.1.4 March 2012 - Extension of the deviation of limit ranges of input power and output power for all the "high
power EDFA" based devices.
3.2.0 Feb 2013
- support of new BKtel device
- support of optical receiver testpoint management (BOR4160,…)
- support for external modulated transmitter expansions (ES28 support)
3.3.1 May 2013
- support of new BKtel devices
10.3.3 NEC Bootloader Software Releases for Embedded NEC
Rel. Date Description
1.7 June 2008 First delivered release of optical transmitter ES10
2.0 Oct 2009 New NEC bootloader to support the new controller
2.1 March 2012 Support of new flash type