Specifications

Root-Screen
NMS Server (ES10-Xla only) This menu contains all NMS
Server specifics
Device No.1 (Device's aliasname is shown) This menu contains all items that
are specific to the device with the
shown aliasname
… (if further devices are communicating with the NMS server)
Device No. # (Device's aliasname is shown)
NMS Server menu(s) (ES10-XLa only)
NMS Server
IP Settings Set the IP parameters of the server
Keycode Change the LCD keycode
Properties Show server properties like
software- and hardware releases
Date & Time Adjust the server's real time clock
Reset Server Software reset the server
Rescan RS485 (Re)Search for BK devices on the
bus
Logout Logout from LCD and return to
Root-Screen
NMS Server->IP Settings NOTE: Dont forget to Save
Settings after a change
Save Settings Save the changed IP parameters
The server gets reset after saving
the new data
IP address Change or show the IP address
Netmask Change or show the netmask
Default router Set or show the default router
DHCP Set or show DHCP usage
Optical transmitter device menu(s)
Alarms / Warnings / Infos Show device's alarm, warning or
info messages
Settings
AGC Mode Change or show the AGC mode
OMI, total rms Change the OMI total rms for AGC
mode, related to the nominal OMI
total rms
RF Gain Change RF Gain for Manual mode,
related to the nominal gain for
nominal OMI total rms and
nominal RF-Input power
SBS Suppression Change or show the SBS
Suppression (ES10-XLa only)
Channel Distance Change or show the Channel
Distance for the CSO-control loop
ITU Frequency Change or show the lasers ITU
wavelength (ES10-XLa only)
Standby Change or show the Standby mode
Funea Broadband Services bv product information page 26 of 31
version: 11-02