Service manual

Combi-Oven Installation
4
Installation
Unpacking the Oven
The oven is best handled while in its wrapping. Use a lifting trolley whenever possible. Introduce the lifting
trolley under the lower cross tube of the stand and place a couple of wooden blocks between the cross
tube and the lifting trolley.
To achieve the best possible balance, introduce the lifting trolley from the front of the oven or from the
motor side. Note that the oven can be lifted off the stand. Remove the original packaging from the oven.
Do not remove the foil that covers the surfaces until the oven has been installed, as the surfaces are
vulnerable to sharp objects such as tools, once the foil has been removed. Remove all protecting parts
that secure the racks in the oven compartment.
The packing must be destroyed in accordance with the rules and regulations
covering the disposal of rubbish in your country. Information on the packaging
material can be obtained from our technical department.