Installation Instructions

BK Technologies
- 26 -
Dual Mode Scan [DSCN]
Conventional and Trunking Channels
Dual Mode scan provides the ability to scan trunking and conventional
channels simultaneously.
NOTE: The Dual Mode Scan list must be setup using the PC Radio
Editor and cannot be changed by the radio user.
When Dual Mode Scan is turned on the
D
icon is displayed and the
radio scans all channels in the dual mode scan list.
Dual Mode Scan can be assigned to a switch or as a button or menu list
item. For best operation, Dual Mode Scan should be assigned in both
conventional and trunking global settings with the PC Radio Editor.
Enhanced Scan [ESCN]
Conventional Channels
Enhanced Scan combines Priority Scan and Channel Scan to one
switch/button. Enabling Enhanced Scan will turn on both Priority and
Channel Scan.
Priority Scan [PSCN]
Conventional Channels
Two channels can be designated as priority channels. When Priority
Scan is on, these channels are monitored for incoming tra󰀩c. When
a qualied signal is detected the speaker is opened to listen to the
message.
If a message is detected on the channel designated as Priority 2, the
radio will continue to monitor Priority 1 channel for activity. If activity is
detected the radio will switch to the Priority 1 channel.
When used in conjunction with Channel Scan, the radio monitors the
Priority channels and will switch from a scanned channel to the Priority
channel if a qualied signal is detected.
Depending on radio setup, priority channels can be tied to the currently
operating zone or can be assigned to a specic channel regardless of
the operating zone.
Channels designated as Priority channels are identied by the P1 or P2
symbol at the top of the LCD display. When Priority Scan is on, the
C
P
symbol will be shown.
Priority Scan operation can be assigned to a switch or as a button or a
menu list item.
Trunked Channels
When on trunked channels, Priority Scan is used to turn system
scanning on or o󰀨.