Owner`s manual
52 BK Radio Programming Manual
CDCSS CODE GUARD VALUES
Codes for the CDCSS Code Guard system may be chosen from the
following list. Since there are no EIA standards for the performance or
compatibility of CDCSS Code Guard systems it is recommended that
an operational test be made on the intended system before wholesale
assignments are made. In some cases either or both transmit and
receive codes will require an inverted code to operate with existing
systems. This can be done during the code programming of the system.
Usually systems using direct Unit-to-Unit transmission (systems without
mobile relays, repeaters, remote control, etc.) may use codes from the
table. Systems with relays, etc., may use code variations for systems
control and operational efî‚¿ciency. The system operator or engineer
should be consulted regarding the operational requirement on such
systems.
023 065 131 165 245 315 411 466 612 703
025 071 132 172 251 331 412 503 624 712
026 072 134 174 261 343 423 506 627 723
031 073 143 205 263 346 431 516 631 731
032 074 152 223 265 351 432 532 632 732
043 114 155 226 271 364 445 546 654 734
047 115 156 243 306 365 464 565 662 743
051 116 162 244 311 371 465 606 664 754
054 125
Contents