Owner`s manual

22 BK Radio Programming Manual
Command (CMD) Radio Keypad Programming
Keypad programming selections for Command portable radios, models
GPH-CMD and DPH-CMD, are divided into three sections, Group
Parameters, Channel Parameters and Global Parameters.
The following items are available in these sections:
Group Parameters (CH 00)
Group Scan List Selection Group Label
Channel Parameters
Bandwidth TX Frequency
RX Frequency TX Mode*
RX Mode* TX Code Guard
RX Guard TX NAC*
RX NAC* Talk Group ID*
Squelch Mode* Channel Label
*Digital Models Only
Global Parameters (GRP 00)
Keypad Programming Password TX Time-Out Timer
ANI ID Scan Delay
PRI-1 Channel Busy Channel
PRI-1 Group ANI/DTMF
PRI-2 Channel Backlight Triggers
PRI-2 Group Backlight Duration
TX on PRI-1 Silent Mode
PRI-1 Lock Battery Saver
Scan List Lock
NOTE: Keypad Programming Mode cannot be entered when the radio
is operating in the Command Group. If the display ashes “CMND GRP”
when you try to enter Programming Mode, release the master switch and
[FCN] key, and select a different group.
Contents