Owner`s manual

RELM Wireless Corporation 9
Channel 0 Group One Functions for Older Models
For E-Series and L-Series radios functions 2 and 3 are used to set the
group’s priority mode.
Option 1-2/3: Priority Mode
Priority Mode A
1-- 12345
PRG
The priority channel follows the channel
select switch.
Priority Mode B
1-- 12345
PRG
The priority channel is xed.
Priority Mode C
1-- 12345
PRG
The priority channel is xed. When in Priority
Mode, you will transmit on the priority
channel regardless of the channel select
knob positron.
Channel 0 Group Two Functions
2-- 12345
PRG
After Group One functions are set, the
display will show ‘PRG 2-12345’ for Group
Two functions. As with Group One functions,
the enabled function numbers will ash. The
disabled functions remain steady
Option 2-1: User Code Guard Selection
2-- 12345
PRG
When function 1 is enabled (ashing) the
user will be able to press the keypad to
independently select the Code Guard values
that are programmed into Channels 1
through 16 while operating on any Channel
1 through 16. When function 1 is disabled the user will be unable to
use the keypad for Code Guard selection. See “User Selected Code
Guard” in your Owner’s Manual.
Contents