Owner`s manual

BK RADIO GBH Owner's Manual
gas container or its fittings.
E. The equipment must be installed and serviced by a qualified
technician.
OPTIONAL ACCESSORIES
• LZA2027 Tone Termination Panel
• LAA0290 Microphone, “Smart” Programming
• LAA0254 Microphone, Desktop
• LAA0276 Microphone, Standard Mobile
BASIC OPERATION
POWER SUPPLY
The Power Supply input voltage requirements is 110 Vac, 50/60Hz, to
produce 13.8 Vdc output at 22 amps.
The AC power cord of the power supply is to be plugged into a 110 Vac
source. The switch on the bottom left side of the front panel of the base
station is used to switch the power supply “ON” or “OFF”. The power
supply has an AC and DC fuse that protects the circuitry against damage
should a short occur.
The power supply should be plugged into an appropriate outlet with the
power supply switch in the down or OFF position. The switch should be
placed in the up or ON position before switching the radio unit ON.
BASE STATION TRANSCEIVER
RECEIVE
T
URN POWER ON
by turning the Volume knob clockwise past the OFF
detent. The radio will beep, indicating that it has passed its self-test and
is operational.
S
ET VOLUME
by pressing the MON button to hear squelch noise. Turn the
Volume knob to set a comfortable volume level. Press the MON button
again to stop squelch noise.
S
ELECT A CHANNEL GROUP
(if applicable) by pressing the GRP button and
turning the Channel Selector knob. Press the GRP button again to return
to channel select mode. See “GRP” on page 6.
The groups that are added or deleted in the Group Scan list must be
made at the keypad of the radio. Adding or deleting of Groups in the
scan list cannot be made by the remote. See page 8 of this manual for
instructions to add or delete groups in the scan list.
Channel Scan ON/OFF
This feature must be programmed into the LZA2027. Some remotes
have an auxiliary button, or a designated Scan button, that can be
assigned to turn the Channel Scan feature ON and OFF. See page 9 of
this manual for an explanation of the feature.
The channels that are added or deleted in the scan list must be made at
the keypad of the radio. Adding and deleting of channels in the scan list
cannot be made by the remote. See page 6 of this manual for
instructions to add or delete channels from the scan list.
Priority Scan ON/OFF
This feature must be programmed into the LZA2027. Some remotes
have an auxiliary button that can be assigned to turn the Priority Scan
function ON and OFF. See page 11 of this manual for an explanation of
the feature.
The Priority channel must be selected/changed at the keypad of the
radio. It cannot be changed by the remote. See page 6 of this manual
for instructions to change the Priority channel.
Repeater Talk Around ON/OFF
This feature must be programmed into the LZA2027. Some remotes
have an auxiliary button that can be assigned to turn the Talk Around
function ON and OFF. See page 7 of this manual for an explanation of
the feature.
Monitor ON/OFF
This feature must be programmed into the LZA2027. Some remotes
have an auxiliary button that can be assigned to turn the Monitor function
ON and OFF. See page 6 of this manual for an explanation of the
feature.
2 19