Specifications

8 BK Radio
2. Receive Frequency
Press the [FCN] key to move to the ‘RX
FREQUENCY’ field. This is the receive
frequency for channel 1 (in MHz).
If the displayed frequency is correct, press
the [FCN] key to advance to the next field.
If a new frequency is desired, press the
[CLR] key followed by the digits of the
desired frequency. Then press the [ENT]
key to store this frequency and automatically
advance to the next field.
3. Receive Mode
This field is the receive mode for channel 1.
Available options are Analog, Digital, and
Mixed.
a. If the mode is correct, press the [FCN]
key to advance to the next field.
b. If a new mode is desired, press the
[PRI] key to cycle through the mode
settings. Press [ENT] to store the new
mode and automatically advance to the
next field.
4. Receive Guard
This field is the Analog Channel Guard value
for Channel 1 receive.
NOTE: 0.0 indicates carrier squelch
operation (no Channel Guard).
If the displayed value is correct, press the
[FCN] key to advance to the next field.
If a new value is desired, press the number
keys 0 thru 9 to enter a Tone Channel Guard
value. See "Tone Channel Guard Values"
on page 26 of this manual.
PRG RX
148.00000
rx frequency
PRG RX
Analog
Rx mode
PRG RX
000.0
rx guar
d
Keypad Programming Manual 21
Press the [ENT] key to store the changed
setting and advance to the next field.
Press the [FCN] key to advance to the next
field if no change is needed.
15. Backlight Triggers
The backlight can be triggered by different
events.
When BACKLIGHT is set to trigger on KEY
PRESS, the display backlight will illuminate
each time a key is pressed, even if pressing
the key has no other effect. The display will
not illuminate if backlight duration is set to
LITE OFF. See "Backlight Duration” on
page 22 of this manual.
When BACKLIGHT is set to trigger on
DSPLY CHNG, the display backlight will
illuminate each time the display receives
input. This includes displayed changes in the
selected channel or scan channel, and the
PR, TX, and SCN annunciators. The display
will not illuminate if Backlight Duration is set
to LITE OFF. See "Backlight Duration" on
page 22 of this manual.
The BACKLIGHT can also be set to trigger
on KEYPRESS OR DISPLAY CHANGE.
Press the [PRI] key to cycle through the
available settings.
Press the [ENT] key to store the changed
setting and advance to the next field.
Press the [FCN] key to advance to the next
field if no change is needed.
PRG
Key or dsply
BACKLIGHT