Specifications

16 BK Radio
Press the [PRI] key to cycle through the
priority channel options.
Setting the channel to MAIN ties the
PRI-1 channel to the Channel Selector
knob.
Press the [ENT] key to store the new priority
channel and advance to the next field.
4. Priority 1 Group
If the Priority 1 channel has been
programmed as one of the 500 channels in
the radio, the group where the channel
resides must be designated. If PRI-1 has
been tied to the Channel Selector knob (set
to MAIN), or programmed OFF, the Priority
Group field is skipped.
Press the [PRI] key to cycle through the
priority group options, or press number keys
to enter a group.
Press the [ENT] key to store the new priority
group and advance to the next field.
5. Priority 2 Channel
This field is the ‘Priority 2 Channel’. Any
one of the 500 channels in the radios can be
designated as the Priority 2 channel, or PRI-
2 can be tied to the Channel Selector knob,
or programmed OFF.
The PRI-2 channel cannot be altered during
normal radio operation.
Press the [PRI] key to cycle through the
priority channel options.
Setting the channel to MAIN ties the
PRI-2 channel to the Channel Selector
knob.
Press the [ENT] key to store the new priority
channel and advance to the next field.
PRG
GROUP 01
PRI-1 GROUP
PRG
CHANNEL 12
PRI-2 CHAN
Keypad Programming Manual 13
NOTE: To enable User NAC Pick List
Selection, press and hold the ‘U’ key “[8]
key”. The display will show “UNAC EN”. To
disable Pick List Selection, press and hold
the ‘U’ key again. If Pick List Selection is
enabled, but none of the entries has been
selected, the radio will use the default NAC
($293) when transmitting in digital mode.
Press [ENT] to store and return to the next
value.
11. Talk Group ID
This field is the Talk Group ID. This value is
only used if the transmit mode selected was
Digital or Mixed, or if User Channel Guard is
activated. The upper part of the display will
show ‘PRG’.
a. If the displayed value is correct, press
the [FCN] key to advance to the next
field.
b. If you wish to change it, press the [CLR]
key followed by the digits for the new
TGID, then [ENT] to store the new value
and automatically advance to the next
field. Valid entries are 1 – 65535.
NOTE: To enable User TGID Pick List
Selection, press and hold the ‘U’ key “[8]
key”. The display will show “UTGID EN”. To
disable Pick List Selection, press and hold
the ‘U’ key again. If Pick List Selection is
enabled, but none of the entries has been
selected, the radio will use the default TGID
(1) when operating in digital mode.
PRG
00001
Talk grp id