Operating instructions

Operation DMH Series VHF Radio
BK RADIO Page 3-23
3.17 ALPHANUMERIC DISPLAY FEATURES
The Alphanumeric Display can be programmed to operate in Numeric Mode,
displaying channel numbers instead of labels.
Display annunciators indicate the following information:
ALPHANUMERIC INDICATION
PR -Priority Channel
PRG -Programming Mode
TX -Transmit
RX -Receive
SCN -Scan List Channel
-Flashing SCN indicates scanning in progress, and
RX SCN indicates receiving on a scanned channel.
ID -Digital reception/transmission - ‘It’s Digital’
-Programming Mode - Automatic Numeric Identification (ANI)
CG -User Channel Guard Active
GRP -Group Label
-Individual Call
-Flashing phone icon indicates missed call.
DMH Series mobile radios can be programmed with the following features:
3.17.1 CHANNEL LABELS
You can program the radio with a label for each of the 25 channel groups and a label
for each of the 16 channels within each group.
To display the channel number associated with a channel label:
1. Press the microphone’s [#] key to display the group number.
2. Press the [#] key again to display the channel number.
3. Press and hold the [#] key to display the channel label.
4. Press the [ENT] key or wait for about 5 seconds to revert to normal radio
operation.
Each label can include up to eight characters, with decimal points available between
characters. Characters can include A-Z, 0-9, -, *, $, /, +, %, \, |, _, <, >, h, or a blank
space.