Operating instructions

DMH Series VHF Radio Installation and Programming
BK RADIO Page 2-11
2.2.2.9.5 ALPHANUMERIC/NUMERIC DISPLAY MODE
When function 5 is enabled (flashing), the display operates
in Alphanumeric Mode, enabling the display of channel
labels. When disabled (steady), the display operates in
Numeric Display Mode. This mode displays channel
numbers instead of labels.
2.2.2.9.6 STORE GROUP THREE SETTINGS
Once each function 1-5 is set as desired, you can store the
changes, discard the changes, or disable all 5 functions.
Press the [CLR] key to disable all Group Three functions
(steady).
Press the [ENT] key to store new Group Three settings into
memory and advance to the next field.
Press the [FCN] key to advance to the next field without
saving changes.
2.2.2.10 GROUP LABELS
After the display mode, the display will show the current
label for the channel group. Each channel group can have a
label of up to eight characters or spaces. The characters can
include 0-9, A-Z, -, *, $, /, +, %, \, |, _, <, >, h, or blank.
If no change is needed, press the [FCN] key to go back to
the starting point for Channel 0 settings.
Press the [CLR] key to erase the current label.
Press the [CLR] key a second time to restore the current
label.
NOTE: Special software available from BK Radio lets you
enter group labels and channel labels from a
computer. Contact your dealer for information.
2.2.2.10.1 Changing The Group Label
Press the [CLR] key. The display becomes blank.
Press number keys to enter 0-9 in positions 1-7. The digits
start in position 7, then move left.
Press the [#] key to toggle a decimal on or off to the right of
the character in position 7. The decimal moves left with the
number in position 7 as new numbers are entered.
Use the following steps to enter a number in position 8 or
characters in positions 1-8:
a. Press the [PRI] key repeatedly to cycle through
characters 0-9, A-Z, -, *, $, /, +, %, \, |, _, <, >, h, blank,
then back to the start again.
If you pass the desired character, press the [PRI] key
repeatedly until you return to the start and reach that
character again.
PRG
3--12345
PRG
GROUP 1