User manual

Test Equipment
Fluke
2108
MOUSER
STOCK NO.
www.mouser.com/fluke
.
V
D
L
OH
˚
72
676-725 FLUKE 725 Multifunction Process Calibrator 2095.00
676-726 FLUKE 726 Precision Multifunction Process Calibrator 2795.00
Accessories
676-TL220 TL220 SureGrip Industrial Test Lead Set 59.10
676-AC72 AC72 Alligator Clip Set 13.25
676-TL71 TL71 Test Lead Set 21.65
676-AC220 AC220 SureGrip Alligator Clips 30.10
676-TL238 TL238 Test Lead Set for High Energy Environments 58.45
676-C125 C125 Soft Meter Case 32.00
676-TPAK TPAK ToolPak, Meter Hanging Kit 33.15
676-I1010 I1010 AC/DC Current Clamp (1000 A) 316.40
676-I410 I410 AC/DC Current Clamp (400 A) 194.65
FLUKE Precision Calibration Test Equipment
[phone]
MOUSER
STOCK NO.
Fluke
Part No.
Description
Price
Each
Fluke
Part No.
Description
Price
Each
FLUKE 725 MULTIFUNCTION PROCESS CALIBRATOR
AND FLUKE 726 PRECISION MULTIFUNCTION
PROCESS CALIBRATOR
The Fluke Multifunction Process Calibrators are powerful, yet easy-to-use field calibrators.
Use the measure and source functions to test and calibrate almost any process parameter.
Features:
•
Small, streamlined shape makes it easy to carry.
•
Rugged, reliable design stands up to field use.
•
Easy to read measure/source screen lets you
view input and output simultaneously.
•
Measure volts, mA, RTDs, thermocouples,
frequency and ohms to test sensors and transmitters.
•
Source/simulate volts. mA, thermocouples, RTDs,
frequency, ohms, and pressure to calibrate transmitters.
•
Measure/source pressure using and of 29 Fluke
700Pxx Pressure Modules.
•
Source mA with simultaneous pressure
measurement to conduct valve and I/P tests
•
Support flow meter testing with frequency and
CPM functions.
•
Perform fast linearity tests with auto-step and
auto-ramp features.
•
Power transmitters during test using loop supply
with simultaneous mA measurement.
•
Store frequently used test setups for later use.
•
Backlight lets you work in poor light.
•
Large battery capacity of four AA cells.
•
3 Year Warranty
FLUKE 718 PRESSURE CALIBRATOR
The Fluke 718 Pressure Calibrator is a complete, self-contained calibration solution.
Features:
•
Built-in pressure / vacuum hand pump, with
vernier and bleed valve.
•
New switch test function captures set, reset
and dead band.
•
Pressure measurement to 0.05% of full span,
using an internal pressure sensor.
•
Pressure measurements to 10,000 PSI, 700
bar using any of the Fluke 700Pxx Pressure
Modules
•
Current measurement with 0.025% accuracy
and 0.001 mA resolution.
•
Wide range of selectable measurement units
for pressure.
•
24 volt loop power supply.
•
Min-Max Hold and damp functions.
•
1/8 inch NPT female pressure fitting.
•
Simple, push-button user interface.
•
Compact size and weight.
•
3 year warranty.
MOUSER
STOCK NO.
Fluke
Part No.
Description
Price
Each
FLUKE PRESSURE MODULES FOR CALIBRATORS
Features:
•
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup.
•
Rugged urethane molded case protects the module from rough handling and harsh conditions.
•
Internal temperature compensation from 0°C to 50°C for full-accuracy performance.
•
Includes NIST-traceable calibration certificate.
•
Module can be calibrated locally using the Fluke 700PCK Pressure Calibration Kit, a PC, and a precision pressure source.
•
One year warranty.
MOUSER
STOCK NO.
Fluke
Part No.
Description
Price
Each
FLUKE 744 DOCUMENTING PROCESS CALIBRATOR - HART
Features:
•
Contains a powerful built-in HART® interface.
•
Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments.
•
Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters.
•
Power transmitters during test using loop supply with simultaneous mA measurement.
•
Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules.
•
Create and run automated as-found/as-left procedures to satisfy quality programs or regulations.
•
Record and document results.
•
Holds up to a full week of downloaded procedures and calibration results.
•
Use many features like autostep, custom units, user entered values during test, one-point and two-point switch
testing, square root DP flow testing, programmable measurement delay, etc.
•
Easy to use.
•
Three year warranty.
•
Bright white dual display. Read both sourced and measured parameters simultaneously.
•
Multi-lingual interface.
•
Rechargeable NiMH battery for 10 hour uninterrupted use. Includes gas gauge.
•
Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
•
Delivered with DPC/Track Sample Software.
•
Compatible with many Asset Management software packages.
The 744 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions
created with software or upload-data for printing, archiving, and analysis.
HART Capabilities
The 744 is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In
fact, it offers the communication capabilities of the 275 HART communicator. Requires no external box or second
tool for everyday HART calibration and maintenance.
Features:
•
Offers fast HART communication.
•
Supports popular models of HART transmitters, with more devise-specific command support than any other
HART field calibrator.
•
Works with multiple masters, burst mode, and multi-drop configurations.
•
Is easy to update as additional instruments are added and new HART versions are released.
•
Interrogate to determine device type, manufacturer, model, tag.
•
Reconfigure the sensor mapping of dual sensor temperature transmitters.
•
Read HART PV function and smart transmitter digital output while measuring analog mA output.
•
Read and write HART configuration functions to make field adjustments to PV range points, damping, and other
top-level configuration settings.
•
Re-label smart transmitters by reading and writing to the HART tag field.
725
726
676-718 718 10U Pressure Calibrator 100 PSIG 1995.00
676-718-30 718 30US Pressure Calibrator 30 PSIG 1995.00
Accessories
676-TL220 TL220 SureGrip Industrial Test Lead Set 59.10
676-AC72 AC72 Alligator Clip Set 13.25
676-TL71 TL71 Test Lead Set 21.65
676-AC220 AC220 SureGrip Alligator Clips 30.10
676-C789 C789 Meter and Accessory Case 101.65
676-744 744-120 Documenting Process Calibrator 5795.00
Accessories
676-AC220 AC220 SureGrip Alligator Clips 30.10
676-C789 C789 Soft Meter Case 101.65
676-700P05 700P05 Pressure Module, 0-30 PSIG 1112.00
676-700P06 700P06 Pressure Module, 0-100 PSIG 1112.00
676-700P07 700P07 Pressure Module, 0-500 PSIG 1112.00
676-700P27 700P27 Pressure Module, 300 PSIG 1112.00
676-700P08 700P08 Pressure Module, 0-30PSIA 1112.00
676-700P09 700P09 Pressure Module, 0-100PSIA 1112.00
676-700PA5 700PA5 Pressure Module, 0-1000 PSIG 1282.00
676-700PA6 700PA6 Pressure Module, 1500PSIG 1282.00
© Copyright 2009 Mouser Electronics
© Copyright 2009 Mouser Electronics
NEXT
BACK
NEXT
BACK
Mouser Catalog Download