User manual

Test EquipmentFluke
2107
Test Equipment
[phone]
FLUKE Test Equipment
787 AND 789 PROCESSMETERS
787 Features:
•
DMM and loop calibrator in one tool
•
Clear LCD with backlight; 4,000 counts (30,000 counts for dc
current)
•
Externally accessible battery for easy battery changes
•
1000V overload protection on V, ohms, frequency
•
150V overload protection on mA, backed-up by 440mA 1000V
fuse
•
25%
Manual Step plus Auto Step and Auto Ramp on mA
output.
789 Features:
•
24V loop power supply
•
Very large dual display
•
Enhanced backlight with two brightness settings
•
1200Ω drive capability on mA source
•
HART® mode setting with loop power and a built-in 250Ω resistor
•
0% and 100% buttons to toggle between 4 and 2mA sourcing for
a quick span check
•
Externally accessible fuses for easy replacement
•
Infrared port to process data in FlukeView™ Software
Features:
•
Fast Fault Finding with Connect-and-View™
•
Connect-and-View hands-off operation provides rock
stable, reliable, and repeatable displays of signals
without touching a button.
•
All signal detail is revealed, including spikes and noise.
•
Even complex signals are triggered automatically and
flawlessly.
•
The Fluke 123 features unique "single test lead does all
measurements" providing intuitive ease of use.
•
You can use one and the same set of test leads for
waveform display, multiple meter readings, capacitance
and resistance measurements, and continuity checking.
•
There's no need to swap leads.
•
You can perform checks while holding the test leads.
•
No adjustments to the ScopeMeter are necessary.
•
Battery power provides isolation from ground and
delivers optimum mobility with no line cords or ground
wire to get in the way of getting good measurements.
•
The Fluke 123 Industrial ScopeMeter streamlines
troubleshooting tasks making you and your team more
efficient.
•
5 Hour NICHD Battery
•
3 Year Warranty
120 SERIES INDUSTRIAL SCOPEMETERS®
Description
Price
Each
MOUSER STOCK NO.
Mfr. Mfr. Part Number
Features:
•
The new ScopeMeter® 190C Series with large, high-resolution,
color screen and new Digital Persistence mode gives you an
even better view of complex waveforms in the most demanding
troubleshooting applications in the field. In addition to the
impressive capabilities of the 190 Series, the new color
models offer:
-
Color for easy identification of individual waveforms.
-
Full-size, high-resolution screen for revealing more
signal detail.
-
Digital Persistence for analyzing complex dynamic
waveforms like on an analog scope.
-
Fast display update rate for seeing dynamic behavior
instantaneously.
-
Stop-on-Trigger in ScopeRecord™ mode for storing
and analyzing pre-trigger waveform data.
-
Waveform reference for visual comparisons.
-
Vpwm function for motor drive and frequency
inverter applications.
-
All the high performance scope specifications of the
Fluke190 Series ScopeMeter apply.
190 SERIES SCOPEMETERS®
Fluke 124 Enhancements:
•
40 MHZ Bandwidth with new Probes
•
20 Setup/screen memories with text annotation
(thru Fluke ScopeMeter software)
•
On screen cursor measurements
•
7 hour NiMH battery
Fluke 125 Enhancements:
•
Bus Health test for inductrial bus systems
•
Power measurements capabilities
•
40MHZ Bandwidth with new probes
Description
Price
Each
MOUSER STOCK NO.
Mfr. Mfr. Part Number
www.mouser.com/fluke
676 - 196B/003 100MHZ B/W display and leads only 3135.00
676 - 196B/003S 100MHZ B/W display with software, cable and leads 3565.00
676 - 196C/003 100MHZ color display and leads only 3135.00
676
- 196C/003S 100MHZ color display with software, cable and leads 3565.00
676 - 199B/003 200MHZ with B/W display and leads only 3475.00
676 - 199B/003S 200MHZ B/W display with software, cable and leads 3950.00
676 - 199C/003 200MHZ color display and leads only 3475.00
676
- 199C/003S 200MHZ color display with software, cable and leads 3950.00
Accessories
676 - TLK-225 SureGrip master accessory set 117.00
676 - DP120 Differential probe 535.00
676 - AC220 SureGrip alligator clips 30.10
676 - AC283 SureGrip pincer clips 30.10
676
- C195 Soft case 141.00
676
- C550 Tool bag 77.50
676
- 80I-110S AC/DC current probe (100A) 549.00
676 - I1000S AC current clamp (1000A) 450.20
676 - I410 AC/DC current clamp (400A) 194.65
676 - SW90W FlukeView ScopeMeter software 242.00
Description
Price
Each
MOUSER STOCK NO.
Mfr. Mfr. Part Number
787
789
707EX INTRINSICALLY SAFE LOOP
CALIBRATOR
Features:
•
Large display and simple, quick-click push rotary button for easy one handed operation
•
Simultaneous mA and % readout for quick, easy interpretation of readings
•
mA accuracy of 0.015%, superior to other loop calibrators
•
Push button with 25% steps for fast, easy linearity checks
•
0-100% “span check” for fast confirmation of zero and span
•
Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing
and loop functional tests
•
Internal loop supply, so you can power and read a transmitter at the same time without
carrying a DMM
•
Measures VDC to 28 V
•
Innovative output adjustment dial with .001mA and 0.1m resolution
•
HART® compatible resistance is connected in series with the loop supply for compatibility with
HART® communicators
•
ATEX and Factory Mutual Certified
•
1 year warranty
The fast, one-handed tool for loop checks in Ex zones.
Description
Price
Each
MOUSER STOCK NO.
Mfr. Mfr. Part Number
676 - 707EX Intrinsically safe loop calibrator 949.00
676 - 787 Fluke 787 Process Meter 699.00
676
- 789 Fluke 789 Process Meter 795.00
Accessories Model
676 - TL220 SureGrip industrial test lead set 787 & 789 59.10
676 - AC220 SureGrip alligator clips 787 & 789 30.10
676
- TL238 Test lead set for high energy environments 787 & 789 58.45
676 - C25 Large soft case for DMMs 787 & 789 31.00
676 - I1010 AC/DC current clamp (1000A) 787 316.40
676 - I410 AC/DC current clamp (400A) 787 194.65
676 - FOM Fiber optic meter 787 429.70
676
- 80TK Thermocouple module (Type K) 787 109.45
676 - TPAK ToolPak, meter hanging kit 789 33.15
676 - PV350 Pressure vacuum module 789 363.30
676 - 80T-150UA Universal temperature probe 789 194.65
676 - FVF-SC2 FlukeView forms software with cable 789 187.15
676 - 123/003 123 with leads only 1385.00
676 - 123/003S 123 kit with cable, software, leads, and case 1715.00
676
- 124/003 124 with leads only 1715.00
676 - 124/003S 124 kit with cable, software, leads, and case 1999.00
676 - 125/003 Industrial Scopemeter (40MHz) 1990.00
676 - 125/003S Industrial Scopemeter (40MHz) 2318.00
Accessories
676 - TL220 SureGrip industrial test lead set 59.10
676
- C125 Soft meter case 32.00
676 - 80I-110S AC/DC current probe (100A) 549.00
676 - I200S AC current clamp (200A) 188.55
676 - 80TK Thermocouple module (Type K) 109.45
© Copyright 2009 Mouser Electronics
© Copyright 2009 Mouser Electronics
NEXT
BACK
NEXT
BACK
Mouser Catalog Download