User manual

Test Equipment
B&K Precision
2097
®
www.mouser.com/bk
[phone]
B&K PRECISION Test Equipment
615-879 299.00
615-875B 199.00
DELUXE DUAL DISPLAY
AUTO RANGING LCR METER
Features:
•
Selectable test frequencies
100Hz, 120Hz, 1KHz, 10KHz
•
Simultaneously displays measured
component value and Q
or Dissipation Factor (D)
•
Display hold
•
Relative mode
•
Tolerance mode
•
Backlight
•
RS 232 Interface
(cable and software required)
CAPACITANCE METER
Features:
•
Dual display simultaneously displays value
and deviation from selected tolerance
•
Auto-range,11000 count resolution and
large LCD with dual display.
•
Wide range resolution and
measurement from 0.1pF to
199.99 mF (50.00mF for model 890B)
•
Sort on preset tolerance of 1,5,10%
•
Program unique values to sort for
specific circuit applications
•
Static Recording,you will know
maximum, average and minimum
values without calculator
•
Relative mode will help you to
calculate the difference between a
standard and a measuring value
•
USB PC interface for data
logging software available
LCR METER
Features:
•
Measures capacitance,
resistance, and inductance
•
Measures dissipation factor of
capacitor and 1/Q of inductors
•
3 1/2 digit LCD display
•
Three year warranty
Specifications:
•
200µH - 200H
•
200pF - 20mF
•
2-20MΩ
•
1% accuracy
615-810C 82.55
CAPACITANCE METER
615-885 575.00
SYNTHESIZED IN-CIRCUIT
LCR/ESR METER
Features:
•
Measurement parameters: Z., L , C,
DCR, ESR, D, Q, and Ø
•
Test conditions: 100Hz, 120Hz, 1 Khz,
10Khz, 1Vrms, 0.5Vrms, 0.05Vrms
•
Dual LCD Display, SMD surface mount
tweezer probe included, includes manual,
SMD probe, 2 AA Ni-Mh batteries, AC
adapter, shorting bar and software
•
Two year warranty
The 885 in-circuit LCR/ESR meter is the
first handheld meter of this kind on the
market. It was designed for both
component evaluation on the production
line and fundamental impedance for
bench-top applications.
The Model 810C Capacitance Meter is a
compact capacitance meter, designed for
accurate measurement of capacitive
components. It features direct plug-in test
sockets and test lead jacks. A zero
adjustment knob is also provided to “zero”
test lead capacitance.
615-889B 1425.00
BENCH LCR/ESR METER WITH
COMPONENT TESTER
Features:
•
Zero adjustment knob
•
Capacitor test sockets
•
Fuse protected
•
Protective rubber boot
•
One year warranty
B&K Part Number 889B
B&K Part Number 810C
B&K Part Number 890B
B&K Part Number 875B
B&K Part Number 885
HAND-HELD COMPONENT
TESTER
Features:
•
Large 0.8" digit, high contrast
LCD readout
•
25 user ranges for versatile
test selection
•
Tests resistance from
0.1Ω through 20MΩ
•
Tests transistors,
SCRs, diodes, and LEDs
•
Tests batteries under actual
loaded conditions
•
5 foot drop-proof, heavy duty case
•
Tilt stand for benchtop use
•
Weight: 11.6 oz. (326g)
•
One year warranty
•
Supplied: test lead; spare fuse
615-815 104.43
B&K Part Number 815
Capacitance meter (0.1 pF to 20 mF) and ohm, meter (0.1 ohm to 20M
ohm) also tests: transistors, beta, diodes, SCR's, LED's and batteries.
SYNTHESIZED IN-CIRCUIT
LCR/ESR METER W/100KHZ
TEST FREQUENCY
Features:
•
Measurement parameters: Z, L, C,
DCR, ESR, D, Q, and O
•
Test conditions: 100Hz, 1kHz, 10kHz,
100kHz, 1 Vrms, 0.25rms, 0.05Vms
•
0.5% basic accuracy
•
Dual LCD display
•
SMD surface mount tweezer probe included
•
Very quick response, user friendly
•
Fully auto/manual selection
•
DC resistance measurement
•
Rechargeable battery/AC powered
•
Infrared RS232 interface capability
•
Two year warranty
615-886 795.69
B&K Part Number 886
The Model 886 Synthesized In Circuit LCR/ESR Meter is the first handheld
meter of this type on the market, with a wide range of test frequencies up to
100kHz and many measurement parameters including Z, L, C, DCR, ESR, D,
Q, and Ø. The 886 is designed for both component evaluation on the
production line and fundamental impedance testing for bench top applications.
With a built in direct test fixture, you can test the lead components very easily.
The optional 4 wire test clip can give a convenient connection to larger
components and assemblies with the accuracy of 4 wire testing. The LCR
meters offer fast, reliable, and versatile testing
at low cost, making the 886 the most advanced
handheld LCR meters available today.
IN-CIRCUIT DCR & ESR
TESTER
Features:
•
100KHz Output test frequency
•
15mVp-p Output test voltage
(will not turn on any
solid-state devices)
•
Automatically discharges
the capacitor under test
•
Microprocessor controlled
•
One-handed tweezer
test probe included
•
One year warranty
615-881 210.00
B&K Part Number 881
The In-circuit ESR & DCR capacitor tester is specially designed to
measure ESR (equivalent Series Resistance) on capacitors in the
range of 0.47µF to 2200µF, in or out of circuit. The ability to trouble
shoot in-circuit saves time and makes the 881 a must for anyone
that test or trouble shoots printed circuit boards.
615-890B 134.00
AUTO RANGING
CAPACITANCE METER
Features:
•
Dual Display simultaneously
displays value and deviation
from selected tolerance
•
Sort on preset tolerance
of 1,5,and 10%
•
Program unique values to
sort for specific circuit applications
•
USB PC interface and data
logging software included
•
9V battery operated
•
Three year warranty
B&K Part Number 830B
615-830B 289.00
615-878 249.00
DUAL-DISPLAY
HAND-HELD LCR BRIDGE WITH
STATISTICAL FUNCTIONS
Features:
•
Measures capacitance, resistance,
and inductance
•
Measures dissipation factor of
capacitors and Q of inductors
•
Simultaneously displays measured
value and Q or dissipation factor
•
Tolerance mode "beeps" to indicate
measured components outside a
1%, 5%, or 10% tolerance around
a reference value
•
Two selectable test frequencies
(120Hz, 1kHz)
•
Auto or manual ranging
•
One year warranty
B&K Part Number 878A
The 879 measures capacitance, resistance (of
non-inductive components) and inductance.
Components can be measured with selectable
test frequencies in series or parallel modes as
desired. The 4 1/2 digit main LCD displays
values to 19,999, and the secondary 3 digit
1,000 count display reads D or Q.
The B&K Precision Model 889B Synthesized In-Circuit
LCR/ESR Meter is a high accuracy test instrument
used for measuring inductors, capacitors and resistors
with a basic accuracy of 0.2%. Also, with the built-in
functions of DC/AC Voltage measurements and
Diode/Audible Continuity checks, the Model 889 can
not only help engineers and students to understand
the characteristic of electronics components but also
being an essential tool on any service bench.
© Copyright 2009 Mouser Electronics
© Copyright 2009 Mouser Electronics
NEXT
BACK
NEXT
BACK
Mouser Catalog Download
Features:
•
Measurement parameters:Z, L, C, DCR,
ESR, D, Q, ACV, DVC, ACA, DCA, and Ø
•
Test conditions: 100Hz, 120 Hz, 1kHz, 10kHz,
100kHz, 200kHz, 1Vrms, 0.25Vrms, 0.05Vrms
•
0.1% basic accuracy
•
Dual LCD display
•
Very quick response, user friendly
•
Fully auto/manual selection
•
DC resistance measurement
•
USB interface