Specifications

SUPPLIED: Instruction manual, software & communication cable IT-E131
OPTIONAL: USB interface kit IT-E132, rack mount IT-E151
TEL. [phone], FAX [phone]
32
Electronic Load
600W Programmable DC
Electronic Load
Model 8510
The model 8510 is a cost effective Programmable DC Electronic
Load with a high degree of accuracy, great display resolution and
a wide operating range of up to 120A or 120V, 600W max. The
8510 is well suited for testing and calibrating DC Power supplies,
DC-DC Converters and batteries. Programmability via the RS 232
or optional USB interface makes the units ideal for the use in
Automated Test Systems.
■ Operates between 0-120VDC, 1mA-120A (600W max)
■ High resolution 1mA/1mV (range dependent)
■ Bright easy to read display ( VFD technology)
■ CV/CC/CW/CR operation
■ Over-Current/Over-Voltage/Over-Power/OverTemperature
Protected
■ RS 232 Interface cable and software included
■ Optional USB interface cable available (order IT-E132)
■ Thermostat controlled internal fan
■ Battery test capability
■ Generate complex test sequences without the need of
an external PC
Programmability via the RS 232 or optional USB interface makes
the Model 8510 suitable for use in automated test systems
The 8510 is a ready-to-run test solution that allows the test
engineer to immediately start testing.
VVoollttaaggee CCuurrrreenntt PPoowweerr
Input rating(0 ~ 40°C) 0 to 120V 1mA to 120A 600W
RRaanngg ee AAccccuurraaccyy RReessoolluuttiioonn
Load Regulation
0-18V ±(0.05%+0.02%FS) 1mV
0-120V ±(0.05%+0.025%FS) 10mV
0-12A ±(0.1%+0.1%FS) 1mA
0-120A ±(0.2%+0.15%FS) 10mA
CV Mode Regulation 0.1-18V ±(0.05%+0.02%FS) 1mV
0.1-120V ±(0.05%+0.025%FS) 10mV
CC Mode Regulation 0-12A ±(0.1%+0.1%FS) 0.1mA
0-120A ±(0.2%+0.15%FS) 1mA
CR Mode Regulation 0.1-10Ω ±(1%+0.3%FS) 0.001Ω
Input Current ≥ FS 10% 10-99Ω ±(1%+0.3%FS) 0.01Ω
Input Voltage ≥ FS 10% 100-999Ω ±(1%+0.3%FS) 0.1Ω
1K-4KΩ ±(1%+0.8%FS) 1Ω
CW Mode Regulation 0-100W ±(1%+0.1%FS) 1mW
Input Current ≥ FS 10% 100-600W ±(1%+0.1%FS) 100mW
Input Voltage ≥ FS 10%
Current Measurement 0-12A ±(0.1%+0.1%FS) 1mA
0-120A ±(0.2%+0.15%FS) 10mA
Voltage Measurement 0-18V ±(0.02%+0.02%FS) 1mV
0-120V ±(0.02%+0.025%FS) 10mV
Power Measurement 0-100W ±(1%+0.1%FS) 1mW
Input Current ≥ FS 10% 100-600W ±(1%+0.1%FS) 100mW
Input Voltage ≥ FS 10%
GGeennee rraall
Battery testing function
Input 0.8-120V
Max measurement capacity 999A/H
Resolution 10mA
Timer range 1~60000sec
Transition Mode
Range of Frequency 0.1Hz-1kHz
Frequency error rate <0.5%
Weight 30.8lb. (14kg)
Specifications
model
8510
One Year Warranty
Accessories
Optional Accessory
Rack Mount
Model IT-E151
The unit showing is
not included