Specifications

TEL. [phone], FAX [phone]
14
DC Power Supplies
Triple Output Programmable
DC Power Supply
Model 9130
SUPPLIED: User manual, line cord, USB communication cable, software installation disk
OPTIONAL: RS232 interface cable IT-E131,TL 5A (5A test leads), TL 30 (30A test leads), TLPS (Power supply
test lead kit)
One Year Warranty
Accessories
VVoollttaaggee CCuurrrreenntt
Output Ratings 0 ~ 30V (Ch1 & Ch2) 0 ~ 3A (Ch1 & Ch2)
0 ~ 5V (CH3) 0 ~ 3A (CH3)
Load Regulation
±(% of output+offset) ≤ 0.01% + 3mV ≤ 0.01% + 3mA
Line Regulation
±(% of output+offset) ≤ 0.01% + 3mV ≤ 0.1% + 3mA
Programming Resolution 1mV 1mA
Readback Resolution 1mV 1mA
Programming Accuracy
12 month, (at 25°C ± 5°C) ≤ 0.03% + 10mV ≤ 0.1% +5mA
±(% of output+offset)
Readback Accuracy
12 month, (at 25°C ± 5°C)
±(% of output+offset) ≤ 0.03% + 10mV ≤ 0.1% +5mA
Temperature Coefficient
(0°C ~ 40°C)
±(% of output+offset) ≤ 0.03%+10mV ≤ 0.1%+5mA
Readback Temperature
Coefficient
±(% of output+offset) ≤ 0.03%+10mV ≤ 0.1%+5mA
Tracking Accuracy
Series Operation ≤ 0.05%+10mA
Tracking Accuracy
Parallel Operation ≤ 0.02%+5mV ≤ 0.1%+20mA
Ripple ≤ 1mVrms/3mVp-p
Noise ≤ 3mVrms
GGeenn eerraall
State Storage Memory 50 memory location
Timer Resolution: 1s, Range: 1s~999999s
Weight 19.8 lbs. (9kg)
Dimensions (W x H x D) 3.45" x 3.8" x 13.9"
214.5mm x 88.2mm x 354.6mm
The 9130 is a fully programmable triple Output DC Power
Supply delivering 0-30V/0-3A on 2 outputs and 0-5V/0-3A on
1 output. Each output is fully floating and outputs can be
adjusted independently or connected in series or parallel to
produce higher voltages or currents. The 9130 is ideally suit-
ed for applications in Electronic Test, Production and Service
where multiple independent DC supplies are required and
bench space is at a premium.
■ 3 independent, fully programmable and electrically
isolated outputs
■ Display & adjust Voltage and Current settings for all
3 channels simultaneously
■ Flexible output configuration: Connect any 2 or all 3
channels in parallel
■ Excellent stability and regulation
■ Very compact foot print (rack mountable 2U x 1/2U)
■ SCPI compatible command set. Communicate via
standard USB communication cable or optional
RS232 cable
■ OVP (Over Voltage) and OTP (Over Temperature)
protection
■ Output on/off control
■ Application Software for front panel emulation and
simple test sequence generation included
■ 50 memory locations for instrument state storage
& recall
■ Closed case calibration
model
9130
Specifications