User manual

16
Square Menu
3.6.2 MODE Key
Selects the output mode: CONT (Continuous), TRIG (Triggered), GATE (Gated), and BRST
(Burst).
To select the output mode, press MODE, then press the function key that corresponds to the
desired Mode menu option, as shown:
Mode Menu
F1: Continuous – Selects continuous output.
F2: Triggered – Triggers one output cycle of the selected waveform for each trigger event.
F3: Gated – Triggers output cycles as long as the trigger source asserts the gate signal.
F4: Burst – Triggers ‘N’ number of output cycles for each trigger event, where N ranges from
2 to 65,535.