User manual

FREQuency<ws>MINimum|MAXimum

Examples: FREQ 5KHZ

FREQ 5E3

FREQ MAXIMUM

FREQ MIN

Query

Syntax: FREQuency?[<ws>MAXimum|MINimum]

Examples: FREQ?

FREQ? MAX

Response: NR3

Considerations:

1) The MIN and MAX arguments refer to currently settable minimum or maximum.

2) FIXed is alias for CW.

AMPLitude <p-p amplitude>

The amplitude command is used to set the peak-to-peak amplitude of the output waveform.

Note that the amplitude and the offset are limited by the relation:

Peak Amplitude + |Offset| <= 5V

Arguments

Type: Numeric

Units: V, mV, VPP, mVPP

Range: 10mV to 10V

Rounding: 1mV for 10mV to 999mV. 10mV for 1V to 10V.

Command Type: Setting or Query

Setting

Syntax: AMPLitude<ws><amplitude>[units]

AMPLitude<ws>MINimum|MAXimum

Examples: AMPL 2.5

AMPL 2.5V

AMPL MAX

Query

Syntax: AMPLitude? <ws>MINimum|MAXimum]

Examples: AMPL?

AMPL? MAX

Response: NR2

Considerations:

1) The MAXimum amplitude is dependent on the offset.