User manual

36
-100 Command Error
-101 Invalid character
-102 Syntax error
-103 Invalid separator
-104 Data type error
-108 Parameter not allowed
More parameters than allowed were received
-109 Missing parameter
Fewer parameters than necessary were received
-110 Command header error
-111 Header separator error
-112 Program mnemonic too long
The mnemonic must contain no more than 12 characters.
-113 Undefined header
-120 Numeric data error
-121 Invalid character in number
-123 Exponent too large
-124 Too many digits
-128 Numeric data not allowed
A different data type was expected
-131 Invalid suffix
-134 Suffix too long
-138 Suffix not allowed
-140 Character data error.
-141 Invalid character data.
Incorrect character data were received.
-144 Character data too long
Character data may contain no more than 12 characters.
-148 Character data not allowed
-158 String data not allowed
-161 Invalid block data
An error was found in the block data
-168 Block data not allowed
-178 Expression data not allowed
Execution Errors
An execution error indicates that the device could not execute a syntactically correct
command, either since the data were out of the instrument's range, or due to a device
condition.
-200 Execution error