User manual

18
Burst Menu
3.6.3 UTILITY Key
Utility Menu
F1: Recall – Recalls a previously stored front-panel setup from the selected buffer. Change
the buffer number by using the rotary input knob. Valid storage buffer numbers are from:
4014B: 1 to 9
4040B: 1 to 19
Buffer 0 is the factory default setup.
F2: Store – Stores the current front-panel setup to the specified storage buffer. Change the
buffer number by using the data keys or the rotary input knob. Valid storage buffer numbers
range from:
4014B: 1 to 9
4040B: 1 to 19
F3: Out-On Def – Selects the OUTPUT state on power-up. Select ON to enable or OFF to
disable the output on power-up.
F4: COUNTER – Enables the built-in frequency counter. The frequency of the signal
connected to the TRIG IN connector will be displayed. The counter is auto ranging with up to
8 digits of resolution.