User manual

Note: Gate and Burst modes are not available on 4014B.

After selecting the TRIGGERED, GATED, or BURST menu, the trigger source menu is

available:

Trigger Menu

F1: Manual – Selects manual as the trigger source. To trigger the waveform generator,

press this MANUAL trigger button again.

F2: Internal – Selects the internal trigger generator as the trigger source. Change the

internal trigger rate displayed with the rotary input knob.

F3: External – Selects the external trigger signal as the trigger source. The trigger source

is supplied through the TRIG IN connector.

In BURST MODE, the F4 key displays N-Burst, representing the number of burst cycles to

output with each trigger. The N value can be changed from 2 to 65,535.