Instruction manual

Errors / Calibrate Key

This key has a double function: errors related in normal mode (see this section)

and calibration related in calibration mode (see calibration section).

There are 2 types of errors: user defined errors and errors defined by SCPI 1999

standard.

Every time an error is generated, a beep will be generated by the power supply

and err indicator will be displayed.

Generated errors are saved in an error queue, in FIFO (first in – first out) order.

If more than 20 errors are generated, the last error is overwritten with –350

error (queue overflow error) and no more errors are saved.

While in remote mode (rmt indicator is displayed), errors are erased from the

queue as you read them.

By pressing Errors / Calibrate key, you enter Errors / Calibrate menu. By

turning the knob, following options are displayed:

Options are selected by pressing Errors / Calibrate key when the desired

option is displayed.

Errors option allows you to view the generated errors.

If you press Errors / Calibrate key again, by turning the knob you can see

all generated errors. Error’s code will be displayed. When all errors were

viewed, if continue to turn the knob, they will be displayed again.

After you viewed all errors, you press Errors / Calibrate key again. The

power supply will erase all the errors from the error queue and Errors

Erased message will be displayed.

Errors

Exit

Cal String

Errors