User manual

28
Save Settings
1. Set up all the instrument settings that you want to save.
2. Then, press and . The display will show the following:
3. Use the current adjust knob or the numeric keypad to enter the memory location in
which to store current instrument settings. Select between 0 – 9. Press to save
to the selection location.
4. If it saved successfully, there will be a message on display: Save Success!
Recall Settings
1. Press . Notice the button will be lit and the cursor on the display will disappear.
This indicates Recall mode. Instrument settings can only be recalled when the
instrument enters this mode.
2. Use the keypad to enter the memory location you want to recall. Enter between 0 to 9.
3. Once entered, the saved settings at the location will be immediately recalled.
Note: When in Recall mode, users can recall settings from different locations
without having to press additional keys each time. For example, you can
press 1 to recall settings in location one, and then press 5 to recall settings
in location 5 on the fly.
4. To exit Recall mode, press and it will no longer be lit. The cursor on the display
will reappear, indicating that the instrument is no longer in Recall mode.
80.000V
12.000A
Save Data to Bank : 0
OFF