User manual

15
2 Getting Started
Before connecting and powering up the instrument, please review and go through the
instructions in this chapter.
2.1 Input Power and Fuse Requirements
Input Power
The supply has a universal AC input that accepts line voltage input within:
Voltage: 115 V (+/-10%) or 230 V (+/- 10 %)
Frequency: 47 Hz – 63 Hz
Before connecting to an AC outlet or external power source, be sure that the power switch is in
the OFF position and verify that the AC power cord, including the extension line, is compatible
with the rated voltage/current and that there is sufficient circuit capacity for the power supply.
Once verified, connect the cable firmly.
WARNING:
The included AC power cord is safety certified for this
instrument operating in rated range. To change a
cable or add an extension cable, be sure that it can
meet the required power ratings for this instrument.
Any misuse with wrong or unsafe cables will void the
warranty.
Fuse Requirements
An AC input fuse is necessary when powering the instrument. It requires a T250V F 15 A, 6 x 32
mm slow blow (slow acting) ceramic tube fuse.
Fuse Replacement
Follow the steps below to replace or check the fuse.
1. Locate the fuse box in the rear panel, next to the AC input receptacle.