User manual

71
www.bkprecision.com
Multimeters
General Accessories
Maxi-Pro DMM Kit
TL-50
Complete accessory kit for all your testing needs.
Includes soft, flexible silicone lead wire for easy
movement.
■ IEC61010-031 compliant
■ Silicone lead wire length 60" (1.5 m)
■ Tri-fold velcro pouch
High Performance Bench DMM Accessory
Kit
T
L500
T
his kit of accessories was assembled to facilitate
requirements by high-performance bench digital
multimeters (DMM's) users. All the most popular
a
ccessories in one kit. The kit offers MiniProbe' test
probe, with spring-loaded tips, for fine probing;
MiniPRO Test Clips for small and MiniFlex Test Clips
f
or micro connections; and for those larger test
p
oints, both spade lug and banana plug adapters,
two pairs of test leads for 4-wire measurements or
calibration hookups, an insulated BNC male to
sheathed banana jack adapter, and an insulated
SMD Tweezer set for surface-mount component
testing.
■ Silicone jacketed test lead wire
■ MiniProbes w/spring loaded stainless steel tips
■ Packaged in plastic case
■ RoHS (2002/95/EC)
40 kV High Voltage DMM Probe
M
odel PR 28A
For voltage measurements above the specifications
of general purpose probes.
General Purpose DMM Kit
T
L 130A
If you need only one basic accessory kit for your
meter, this is the one. Attach probes or clips to the
s
heath plug to complete your test. Soft, flexible
silicone leads make movement easy. Kit is voltage
and current rated for electronic or electrical
a
pplications.
■ IEC61010-2-031 compliant
■ S
ilicone lead wire length 60" (1.5 m)
■ Tri-fold velcro pouch
DC/AC Current Clamp
CP 3
■ Converts any DMM to a current clamp
■ Measures current without disconnecting circuit
under test
■ Measures to 400 A DC or AC
■ Outputs 1 mV per Amp, operates on 2 V range
of any DMM
Red and Black CAT III (IV) 1000V (600V)
Test Leads
TL37
R
ight angled sheathed banana replacement 10A
test leads for digital multimeters.With tip cap
on, they are rated CATII 1000 V, CAT IV 600 V
with tip cap off, they are rated CAT II 1000 V
Specifications PR 28A
Attenuation x1000
Voltage (AC) 20 kV
V
oltage (DC)
4
0 kV
B
andwidth
6
0 Hz
Input Impedance 1000 MΩ
Accuracy (AC & DC) ±3%
Cable Length 48" (1.2 m)
Surface Mount Tweezers
TL 8
■ Two conductor leads
■ 400 Vrms, 1 A
Description TL-50
4mm Straight to Right-Angle
Silicone Leads, 1.5 m
1000 V CATIII 12 A
Probe Bodies w/Ø2 mm Tip 1000 V CATIII 36 A
Pincer Style Clips 1000 V CATIII 6 A
Alligator Clips 300 V CATI 3 A
Spade Lug Adapters 42 V (1000 V) - 36 A
Banana Plug Adapters 42 V (1000 V) - 36 A
Fully Insulated Alligator Clips 1000 V CATIII 20 A
Description TL-130A
4mm Straight to Right-Angle
Silicone Leads, 1.5 m
1000V CATIII 12 A
Probe Bodies w/Ø2mm Tip 1000V CATIII 36 A
Alligator Style Clips 1000V CATIII 20 A
Alligator Clips 300V CATI 3 A
Specifications CP 3
(Accuracy specified at 18° to 28°C)
Current Range 2 A to 400 A, DC or AC
Frequency Response (AC) 50 Hz - 400 Hz
Accuracy ±(2% reading + 2 A)
Input Resistance 10 kΩ min.
Maximum Conductor Size 1.1"(30 mm)
Power Requirement 9 V battery, NEDA 1604
Battery Life 100 hr typical
Operating Temperature 0° to 40°C, <70% RH
Storage Temperature -20° to + 70°C, <80% RH
Qty. Description Color
(4)
Test Lead 4mm Sheathed P-RaP
Silicon 0.75, 100 cm (40")
(2) Black,
(2) Red
(2) Spring Tip Mini-Probe-4mm Jack
(1) Black,
(1) Red
(1) Insulated BNC male Adapt-4mm Safety Jacks
-
(2) Adapter 4mm Banana Plug to Jack
(1) Black,
(1) Red
(2)
Mini Flex Clip-4mm Jack-Silicon 0.40,
10 cm
(1) Black,
(1) Red
(2) Adapter 6mm Spade 4mm-Jack
(1) Black,
(1) Red
(2) Lead minipro-J-PVC 0.40, 10 cm
(1) Black,
(1) Red
(1)
Tweezer Test Lead Set- 4mm P,
w/PVC pouch
-