Instruction manual

Section 3
Technical Specifications
3.1 FREQUENCY CHARACTERISTICS
Waveforms : Sine, Square, Triangle, Ramp, ±Pulse.
Range : 0.5Hz to 4MHz in 6 ranges
Tuning Range : Variable Multiplication factor of 0.04 to 4.0 of selected
range.
Resolution : 0.001Hz (model 4003A only).
Operating Modes : Normal, Sweep, VCF.
Frequency Stability : Output will change less than 0.1% for 15 minutes after
switching ON and it will change less than 0.2% for 24
Hours after switching ON.
3.2 OUTPUT CHARACTERISTICS
Impedance : 50Ω ±2%.
Level : Variable control
From
0.1Vp-p (No Load).
0.05Vp-p (50Ω Load).
To
20Vp-p (No Load) ±1Vp-p.
10Vp-p (50 Ω Load) ±0.5Vp-p.
Attenuation : -20dB ±2%.
DC Offset : Variable : ±10V open circuit,
±5V into 50 Ω.
3.3 SINE WAVE
Distortion : Less than 2% (1Hz - 100kHz).
Harmonic Ratio : <30dB, 100kHz to 4MHz.
Frequency Response : <0.1dB, upto 100kHz.
<1dB, 100kHz to 4MHz.
3.4 TRIANGULAR WAVE
Symmetry : 50% (Positive Half) to 50%
(Negative Half).
<2%, 1Hz to 100kHz.
3.5 RAMP WAVE
Frequency Range : 0.5Hz to 3.5MHz.
Symmetry : 80% (Rise Wave) to 20% (Fall Wave)
<5%, 1Hz to 100kHz.
Rising Wave linearity : <2%, 1Hz to 100kHz.
4