Instruction manual

9
6. OPERATING INSTRUCTIONS
6.1 Setting of Operation Modes
Output On/Off Mode
1. Press SHIFT key.
The display will show Sh:Ft.
2. Press (O/P On/Off) key within 3 seconds.
Watch for the appearing On/Off symbol in the display to confirm your setting, otherwise repeat the above procedure.
Lock/Unlock the Keypad and Jog Dial
1. Press SHIFT key.
The display will show Sh:Ft.
2. Press (Lock/Unlock) key within 3 seconds.
Watch for the appearing Lock/Unlock symbol in the display to confirm your setting, otherwise repeat the above procedure.
PC Interface RS-232/RS4S5
1. Press SHIFT key.
The display will show Sh:Ft.
2. Press (RS232/485) key within 3 seconds.
3. Select desired PC Interface by the (RS232/485) key.
4. For RS 232 press RECALL to confirm setting.
5. For RS 485 enter 485 address followed by RECALL to confirm setting.
Upper Voltage Limit Setting
This feature limits the upper level setting of output voltage to prevent inadvertent setting of high voltage, which may damage your application. The
value of this upper voltage range limit will be retained until further reset.