Installation Guide

BJORNWOODWORKS.com
VERSION 01 2020
4
PERGOLA
Installation Instructions
Lay out the rug or tarp so you don’t scratch or mar your parts. Then place
your parts as shown in the Top View. Make sure that the shoulder bracket is
oriented correctly, the leg with the back stop should be facing up.
Using a pencil, mark each piece of wood 6 inches in from the end.
Slide each piece of wood into corner brackets where you marked the line as
show in the Top View.
You will notice the lumber is not a tight fit, this is
intentional do to the fact that wood is not perfect.
Wood will expand, contract and may come slightly
twisted, the extra space will help in installation and
overall life of the wood.
Keep wood centred in all brackets while tightening
lag bolts.
NOTE
Wood
STEP 1
STEP 2