Product Manual

Husky Corporation • 2325 Husky Way • Pacic, MO 63069 • Phone: [phone] • Fax: [phone] • www.husky.com
Page 2 009364-1 12/2013
7. Extend the oat arm to the correct length H
L
/2.
8. Tighten the oat arm's set screw to lock the position of the oat arm.
9. Remove and KEEP the chain eyelet.
H
L
/2
10. Swing the oat arm so it lays at and in-line with the support arm.
11. Pull the chain until the orange indicator is completely hidden by the printing on the sight glass.
Hold the spring loaded shaft in that position.
12. Pull the chain through the hole on the oat arm until there is no
slack and then reattach the eyelet from step 9.
EMPTY
1/2
FULL
13. Verify proper function. If it's not working properly and if the orange indicator reads incorrectly,
adjust the position of the eyelet. If repositioning the eyelet doesn't work, verify the length of the
arms and overall length is correct.