Owner`s manual

BJ Devices TB-12(TB-5) MIDI CONTROLLER. Owner’s manual. Version2.3

Banks management

Loading Banks

By default, LOAD button is used to load the controller banks. To load a bank when in Performance mode,

press LOAD. Load bank menu will be displayed(see Fig. 16).

Fig. 16

Select the required bank with and , bank name will be displayed in the lower line To confirm

bank load press .

You can also change banks up and down on-the-fly. To do so, you will need to program any two

footswitches out of 12 (5) available. Enter Buttons Setup menu and assign BNKup and BNKdown to the

desired footswitches (see Fig. 17).

Fig. 17

When you do so, LEDs of these footswitches will become inactive.

Saving Banks

To save bank setting enter setup mode by pressing Setup button. When in setup mode, navigate to Save to

Bank submenu and press . You will see Select bank: [current bank number] and bank name in the

upper line(see Fig. 18).

Fig. 18

Choose the bank number which setting you want to save with , .