Owner`s manual

BJ Devices TB-12(TB-5) MIDI CONTROLLER. Owner’s manual. Version2.3

Managing Presets

TB-12(TB-5) allows you to access up to 12(5) presets of a controlled MIDI device. You can program each

footswitch (or only some of them) to activate a preset of a MIDI controlled device. This preset is displayed

in the lower line of the screen (in Performance mode) and the LED of the corresponding footswitch lights

red. Enter Setup mode and navigate to Buttons Setup submenu to choose, which footswitches will switch

presets. To set the footswitches as preset change switches (Program Change messages will be sent) set the

Type to PC in Button 1 type – Button 12 type submenus.(see Fig. 7)

Fig. 7

The preset number is specified in Performance mode with and buttons; all buttons of the

controller will stay active. When you set preset number in Performance mode, keep in mind that you do so

for the currently active footswitch. To set preset number for a different footswitch, press that footswitch

first. Pressing a preset change footswitch will initiate a Program Change message with the desired preset

number. Don’t forget to save the changes - all the changes you make will be lost when you switch the bank

or turn the controller off unless you save the changes in the internal memory of the controller. To do so,

save the bank (see Saving Banks).