Specifications

Installation Instructions
50 Stiles Road • Salem, NH 03079 • Toll Free 1-800-260-5793 • 603-870-9400 • www.Bizfon.com
© 2005 All rights reserved. Bizfon is a registered trademark. All other names may be trademarks or registered trademarks of their respective owners.
Revised: August 5, 2005 Page 11
9 Data Network
The Local Area Network (LAN) and Wide Area Network (WAN) data network ports are 10BaseT/100BaseTX
auto-sensing and auto-MDI/MDIX ports.
The Bizfon 7000 is a sophisticated network appliance that must be properly configured before being connected
to the LAN and WAN.
Note: Do not plug any network cables into the server without first properly configuring the server.
Failure to heed this warning may result in a disruption of network connectivity with other equipment on
the network.
After the network is properly configured, the LAN and WAN network cables can be plugged in. Standard RJ-45
category 5 network cables must be used. The four LAN ports are all switched Ethernet ports and may be used
in any order.
The LED’s on the LAN and WAN ports are defined in Table 4.
LED Identification State Description
On 100Mbps
Left - Amber
Off 10Mbps
Off No link: the network is not connected
On Link: the network is successfully connected
Right - Green
Blinking Activity: data is being transmitted or received
Table 4: Network Port LED Definitions