User manual

Rev. 1.05
- 44 -
SRP-150
GS v 0 m xL xH yL yH dl…dk
[Name] To print raster bit image
[Type] ASCII GS v 0 m xL xH yL yH dl…dk
HEX 1D 76 30 m xL xH yL yH dl…dk
DECIMAL 29 118 48 m xL xH yL yH dl…dk
[Range] 0 ≤ m ≤ 3 , 48 ≤ m ( 51
0 ≤ xL ≤ 255 , 0 ≤ xH ≤ 255 , 0 ≤ yL ≤ 255
0 ( d ( 255
k = (xL+xHx256) x (yL+yHx256) (k=0)
[Description] To select the raster bit-image mode
The value of m for selecting each mode is as follows.
m
Mode Vertical dot density Horizontal dot density
0,48 Normal 200dpi 200dpi
1,49 Double-width 200dpi 100dpi
2,50 Double-height 100dpi 200dpi
3,51 Quadruple 100dpi 100dpi
- xL and xH are for selecting the number of data bit (xL + xH x 256) in
horizontal direction of the image.
- yL and yH are for selecting the number of data bit (yL + yH x 256) in
vertical direction of the image.
GS w n
[Name] To set the barcode width
[Type] ASCII GS w n
HEX 1D 77 n
DECIMAL 29 119 n
[Range] 2 ≤ n ≤ 6
[Description] To set the width of the barcode
Bi-level Bar Code
n
Module width (mm) for
Multi-level Bar Code
Thin element width
(mm)
Thick element width
(mm)
2 0.250 0.250 0.625
3 0.375 0.375 1.000
4 0.500 0.500 1.250
5 0.625 0.625 1.625
6 0.750 0.750 2.000
- Multilevel barcode: UPC-A, UPC-E, JAN13, CODE93, CODE128
- Bi-level barcode: CODE39, ITF, CODABAR
[Default value] n = 3