User manual

Rev. 1.05
- 42 -
SRP-150
Control character Control character
ASCII HEX DECIMAL
HRI
character
ASCII HEX DECIMAL
HRI
character
NUL 00 0 ■U DLE 10 16 ■P
SOH 01 1 ■A DC1 11 17 ■Q
STX 02 2 ■B DC2 12 18 ■R
ETX 03 3 ■C DC3 13 19 ■S
EOT 04 4 ■D DC4 14 20 ■T
ENQ 05 5 ■E NAK 15 21 ■U
ACK 06 6 ■F SYN 16 22 ■V
BEL 07 7 ■G ETB 17 23 ■W
BS 08 8 ■H CAN 18 24 ■X
HT 09 9 ■I EM 19 25 ■Y
LF 0A 10 ■J SUB 1A 26 ■Z
VT 0B 11 ■K ESC 1B 27 ■A
FF 0C 12 ■L FS 1C 28 ■B
CR 0D 13 ■M GS 1D 29 ■C
SO 0E 14 ■N RS 1E 30 ■D
SI 0F 15 ■O US 1F 31 ■E
DEL 7F 127 ■T
<Example> Output GS k 72 7 67 111 100 101 13 57 51
[When using CODE128 (m=73)]
- When CODE128 is used for the printer, the details of the data transmission are as
follows.
① Code set character in front of the barcode string
One of CODE A, CODE B, or CODE C must be selected.
※ Description of the CODE128 bar code
CODE128 barcode is the combination of three types of code sets and 103
different barcode characters, and one barcode can represent 128 ASCII
codes and two digit numbers. Each code set can represent the following
characters.
* Code set A: ASCII character 00H to 5FH
* Code set B: ASCII character 20H to 7FH
* Code set C: Two digits number (100 numerals from 00 to 99)