User manual

Rev. 1.05
- 39 -
SRP-150
GS L nL nH
[Name] To set the left margin
[Type] ASCII GS L nL nH
HEX 1D 4C nL nH
DECIMAL 29 76 nL nH
[Range] 0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
[Description] Left margin is determined by nL and nH.
Left margin is set to [(nL + nH X 256) X (horizontal motion unit6)] inches
Printable area
Left Margin Printing area width
GS V ① m GS V ② m n
[Name] To Select cut mode and cut paper
[Type] ASCII GS V ① m
HEX 1D 56 m
DECIMAL 29 86 m
ASCII GS V ② m n
HEX 1D 56 m n
DECIMAL 29 86 m n
[Range] ① m = 1, 49
② m = 66, 0 ≤ n ≤ 255
[Description] Selects a mode for cutting paper and executes paper cutting.
The value of m selects the mode as follows.
m
Print Mode
0, 1, 49 Partial cut (one point center uncut)
66
Feeds paper (cutting position + [n x )vertical motion unit)]),
And cuts the paper partially (one point center uncut).
GS W nL nH
[Name] To set the printing area
[Type] ASCII GS W nL nH
HEX 1D 57 nL nH
DECIMAL 29 87 nL nH
[Range] 0 ≤ nL ≤ 255 , 0 ≤ nH ≤ 255
[Description] Printing area is accurately set by nL and nH.
Printing area is set to [(nL + 256 x nH) x horizontal motion unit] inches.
Printable area
Left Margin Printing area width