User manual

Rev. 1.05
- 38 -
SRP-150
GS :
[Name] To define beginning/end of macro
[Type] ASCII GS :
HEX 1D 3A
DECIMAL 29 58
[Description] To define beginning/end of macro
GS B n
[Name] Black and White switching printer mode on/off
[Type] ASCII GS B n
HEX 1D 42 n
DECIMAL 29 66 n
[Range] 0 ≤n ≤255
[Description] Black and White switching printer mode
- Black and White switching mode is OFF when LSB is 0
- Black and White switching mode is ON when LSB is 1
GS H n
[Name] To select the printing position of the HRI characters
[Type] ASCII ESC H n
HEX 1D 48 n
DECIMAL 29 72 n
[Range] 0 ≤ n ≤ 3 , 48 ≤ n ≤51
[Description] To select the printing position of HRI characters when printing the bar code
Select the printing position using n as shown below
n
Printing position
n
Printing position
0,48 No printing 2,50 Under the bar code
1,49 Over the bard code
3,51 Both over and under
the bar code
- HRI (Human Readable interpretation)
[Default value] n = 0
GS I n
[Name] To send the printer ID
[Type] ASCII ESC I n
HEX 1D 49 n
DECIMAL 29 73 n
[Range] 1 ≤ n ≤ 3 , 49 ≤ n ≤ 51
[Description] To send the printer ID using n as shown below
n
Printer ID Specifications ID (HEXaDECIMAL)
1,49 Printer Model ID
SRP-150P / SRP150U /
SRP-150S
30
2,50 Type ID 02
3,51 ROM Version ID Depends on ROM version 10