User manual

Rev. 1.05
- 37 -
SRP-150
<Function 4> GS ( E pL pH fn a (fn=4)
[Format]
[Range]
[Description]
ASCII GS ( E pL pH fn a
Hex 1D 28 45 pL pH fn a
Decimal 29 40 69 pL pH fn a
(pL + pH x 256) = 2 (pL=2, pH=0)
fn=4
a=1, 2, 8, 9, 10, 11
▪ Transmits the setting value(s) of the memory switch specified by a.
HEX DECIMAL Amount of Data
Header 37H 55 1 byte
Flag 21H 33 1 byte
Data 30H or 31H 48 or 49 8 bytes
NUL 00H 0 1 byte
▪ Data for the setting is transmitted as 8 bytes or a data string in the order
from bit 8 to bit 1, as follows :
- Off : HEX = 30H / DECIMAL = 48
- On : HEX = 31H / DECIMAL = 49
GS * x y d1...d (x X y X 8)
[Name] To define the download bit image
[Type] ASCII GS * x y d1...d (x X y X 8)
HEX 1D 2A x y d1...d (x X y X 8)
DECIMAL 29 42 x y d1...d (x X y X 8)
[Range] 1 ≤ x ≤ 255
1 ≤ y ≤ 48 where, x x y ≤1536
0 ≤ d ≤ 255
[Description] Download bit image is used as clear dot by x and y.
- x: number of dots in horizontal direction
- y: number of dots in vertical direction (download bit image printing)
GS / m
[Name] To print download bit image
[Type] ASCII GS / m
HEX 1D 2F m
DECIMAL 29 47 m
[Range] 0 ≤ m ≤ 3, 48 ≤ m ≤ 51
[Description] The printing of download bit image is used as a clear mode by m.
Mode is selected by m as shown in the following table.
m
Mode Vertical Dot Density Horizontal Dot Density
0,48 Normal 200 DPI 200 DPI
1,49
Two times horizontal
magnification
200 DPI 100 DPI
2,50
Two times vertical
magnification
100 DPI 200 DPI
3,51
Overall two times
magnification
100 DPI 100 DPI