User manual

Rev. 1.05
- 27 -
SRP-150
ESC SP n
[Name] To set the right side space of the characters
[Type] ASCII ESC SP n
HEX 1B 20 n
DECIMAL 27 32 n
[Range] 0 ≤ n ≤ 255
[Description] To set the right side space of the characters
ESC ! n
[Name] To set the printer mode
[Type] ASCII ESC ! n
HEX 1B 21 n
DECIMAL 27 33 n
[Range] 0 ≤ n ≤ 255
[Description] Printer mode is set depending on the value of n as follows
Bit Off/On HEX DECIMAL Function
Off 00 0 Font A(12x24) Selected
0
On 01 1 Font C(9x24) Selected
Off 00 0 Not defined
1
On 02 2 Not defined
2 - - - Not defined
Off 00 0 Highlight mode is not set
3
On 08 8 Highlight mode is set
Off 00 0 Double-height mode is not selected
4
On 10 16 Double-height mode is selected
Off 00 0 Double-width mode is not selected
5
On 20 32 Double-width mode is selected
6 - - - Not defined
Off 00 0 Underline mode is not selected
7
On 80 128 Underline mode is selected
ESC $ nL nH
[Name] To set absolute position
[Type] ASCII ESC $ nL nH
HEX 1B 24 nL nH
DECIMAL 27 36 nL nH
[Range] 0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
[Description] To set the distance from the beginning point of the line and print the
characters. The distance from the beginning point for the printing position
means horizontal or vertical motion unit.