User manual

Rev. 1.05
- 25 -
SRP-150
10. Summary of Control Command
HT
[Name] Horizontal Tab
[Type] ASCII HT
HEX 09
Decimal 9
[Description] Set the horizontal tab if you want to use the print position.
LF
[Name] To print and line feed
[Type] ASCII LF
HEX 0A
DECIMAL 10
[Description] To print the data in the printer buffer and feed one line.
CR
[Name] To print and carriage return
[Type] ASCII HT
HEX 0D
DECIMAL 13
[Description] To print the data in the printer buffer and move the printer head to the
beginning position of the line.
DLE EOT n
[Name] To send the real-time status
[Type] ASCII DLE EOT n
HEX 10 04 n
DECIMAL 16 4 n
[Range] 1 ≤ n ≤ 4
[Description] Real-time status of the printer selected by n as shown below will be sent.
n = 1: To transmit the printer status
n = 2: To transmit the off-line status
n = 3: To transmit the error status
n = 4: To transmit the paper-sensing status