Service manual

SRP-150
Rev. 1.02
- 7 -
2. Installation and Operation
2-1 Installation
2-1-1 AC Adapter Installation
2-1-2 Interface Cable(P,S) Installation
Figure 2-1-1. AC Adapter Installation
1. Mack sure the printer is turned off with the
side of the switch.
2. Plug the power cord into the SMPS
on the printer.
3. Plug the AC Adapter power cord into the wall
outlet.
2-1-3 USB Cable Installation
Figure 2-1-2. I/F Cable Installation
1. Turn off the printer, host ECR and Computer.
2. Plug Serial(RS-232), or Parallel Cable
connector
into the I/F connector on the printer.
3. Turn on the printer, host ECR and Computer.
2-1-4 Cash Drawer Cable Installation
Figure 2-1-3. USB B-TYPE Cable Installation
1. Turn the printer off.
2. Plug USB cable connector into
the connector on the printer.
Figure 2-1-4. Cash Drawer Cable Installation
1. Turn the printer off.
2. Plug the cash drawer cable connector into
the connector on the printer.
USB Connector
Interface Cable
Parallel / Se
r
ial
USB-B Cable
Interface Connecto
r