Service manual

SRP-150
Rev. 1.02
- 41 -
Screw
Holder-
button
Case-main
Button-
push
Ass’y-function
1. Remove two screws.
2. Separate the holder-button and button-push from the case-main.
- Push the boss part of the button-push in the direction of the arrow shown in the picture to
easily remove it.
1. Remove two screws.
2. Separate the parts including the Ass’y-pcb-function.
- Care must be taken while assembling the button-feed
as it must be assembled in the right direction.
Screw
Button-
feed
Ass’y-pcb-function
Led-
holder
Cover-
function