Service manual

SRP-150
Rev. 1.02
- 40 -
Screw
Ass’y-bracket-pcb-main
SMPS
Ass’y- Case-main
1. Remove three screws.
2. Remove the SMPS & Ass’y-bracket-pcb-main from the Ass’y-Case-main.
- Take care not to damage or cut wires while separating the FPC and connectors
connected to the board.
Ass’y-pcb-main
Ass’y-Bracket-pcb
1. Remove four screws.
2. Separate the Ass’y-bracket-pcb from the Ass’y-pcb-main.
Ass’y-power-switch