Service manual

SRP-150
Rev. 1.02
- 39 -
5. Disassembly and Assembly
1. Remove two cover pins.
2. Remove two screws from the Ass’y cover-paper and separate the Ass’y platen-panel.
Ass’y Cover-paper
Ass’y Case main
Cover-pin
Screw
Ass’y platen-
panel
Roller-paper-end
Ass’y
Case-main
Cover-Cutter
1. Separate the cover cutter.
2. Separate the roller-paper-end from the Ass’y-Case-main.
- Take care not to scratch the surface contacting the paper while separating them.
- Scratches on the roller will cause scratches on the paper.
Avoid scratching