Service manual

SRP-150
Rev. 1.02
- 17 -
3-3-2 Character Specification
Item Description Remark
Number of Character • Alphanumeric Characters : 95
Character Structure
• 12 x 24 (Font A) (Including 2-dot spacing in horizontal)
• 24 X24 (GB2312)
Table 3-3-2. Thermal Printer Character Specification
3-3-3 Paper Specification
Item Description Remark
Paper Type • Mono :TF50KS-E(Nippon paper)
Paper Form • Paper Roll
Paper Width • 58mm(+0,-1)
Paper Roll Size • Max 80mm(3.14”)
Table 3-3-3. Thermal Printer Paper Specification
Note ※
* Mono : The Following paper can be used instead of the specified paper above.
TF50KS-E(Paper thickness : 65μm) : Nippon Paper industries Co., Ltd.
PD 160R ( “ : 75μm) : New Oji Paper Mfg, Co., Ltd.
P350 ( “ : 62μm) : Kansaki Specialty Paper, Inc. (USA)
3-3-4 Reliability and Environment Specification
Item Description Remark
Life
• Mechanism : Monochrome : 20,000,000 Lines
The reliability values above are assumed When a 15-Line feed
and a 10-Line print repeat alternately
• Head : 1x10
8
Pulses, Monochrome : 50Km
• Auto Cutter : 1,000,000 Cut
Environmental Temperature
• Operating : 0°C ~ +45°C
• Storage : -10°C ~ +50°C (Except for Paper)
Humidity • 10% ~ 90% RH
Table 3-3-4. Thermal Printer Reliability Specification