Specifications

SPP-R300 Command Manual
Rev. 1.00 BIXOLON
- 91 -
Msw Value Function
48 2 byte character mode not selected
1-4
49 2 byte character mode selected
48 Print speed 100mm/s
1-5
49 Print speed 50mm/s
1-6 48 Reserved
• The print density adjusts the darkness of characters to be printed.
• 2-byte character mode is selected to support for Chinese, Japanese, and Korean model.
• The printer supports 2 different printing speeds, 80 and 50mm/sec.
Please be sure that the printing quality at higher speed may be worse than at the lower.
■
The setting items of the memory switch 2 are as follows:
Msw Value Function
48 Font selection: Font A
2-1
49 Font selection: Font B
48 Autocutter Function: Partial Cutting
2-2
49 Autocutter Function: Full Cutting
■
Code page selection using the memory switch 2-3 through 2-8.
Msw2-8 Msw2-7 Msw2-6 Msw2-5 Msw2-4 Msw2-3
Character Table
48 48 48 48 48 48 PC437
48 48 48 48 49 48 Katakana
48 48 48 49 48 48 PC850
48 48 48 49 49 48 PC860
48 48 49 48 48 48 PC863
48 48 49 48 49 48 PC865
48 48 49 49 48 48 WPC1252