Specifications

SPP-R300 Command Manual
Rev. 1.00 BIXOLON
- 58 -
Remarks:
PDF417 symbol data (when cn=48)
■ The symbol data is defined, stored to the symbol storage area by Function 080 and printed by the specification of
Function 081. The symbol data in the area remains reserved until the following processes are executed:
• Performing Function 080
• Performing ESC @
• Performing the printer reset and power-off
■ The setting values of Functions 065 to 070 are utilized for the processing of Function 080 or 082. The printable area
must be large enough to accommodate different-size symbols. If not, the symbol may not be printed.
■ The same symbol data is repeatedly printed by executing Function 081 after performing Function 080.
■ The same symbol data is printed differently by executing Function 081 after setting the feature of the symbol by using
Functions 065 through 070.
■ By using Function 082, the symbol size printed by Function 081 is Available.
QRCODE Symbol Data (cn = 49)
■ The symbol data is defined, stored to the symbol storage area by Function 180 and printed by the specification of
Function 181. The symbol data in the area remains reserved until the following processes are executed:
• Performing Function 180
• Performing ESC @
• Performing the printer reset and power-off
■ The setting values of Functions 165 to 169 are utilized for the processing of Function 180 or 182. The printable area
must be large enough to accommodate different-size symbols. If not, the symbol may not be printed.
■ The same symbol data is repeatedly printed by executing Function 181 after performing Function 180.
■ The same symbol data is printed differently by executing Function 181 after setting the feature of the symbol by using
Functions 165 through 169.
■ By using Function 182, the symbol size printed by Function 181 is available.
MAXI CODE Symbol Data (cn = 50)
■ The symbol data is defined, stored to the symbol storage area by Function 280 and printed by the specification of
Function 281. The symbol data in the area remains reserved until the following processes are executed:
• Performing Function 280
• Performing ESC @
• Performing the printer reset and power-off
■ The setting value of Functions 265 is utilized for the processing of Function 281. The printable area must be large
enough to accommodate different-size symbols. If not, the symbol may not be printed.