Specifications

SPP-R300 Command Manual

Rev. 1.00 BIXOLON

- 123 -

GS ＼

Function: Set relative vertical print position in page mode

Code:

ASCII

＼

nL nH

Hex

1D 5C nL nH

Decimal

29 92 nL nH

Range:

0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255

Default:

None

Description:

This command moves the vertical print position to [(nL + nH x 256) x (vertical or horizontal motion units)] relative to the

current position in page mode.

Remarks:

■ This command is effective in page mode. When used in standard mode, it is ignored.

■ The setting exceeding the print area set by ESC W is ignored.

■ With standard mode selected, the vertical motion unit is used.

■ In page mode, the horizontal motion unit is used when printing start poison is defined to the upper right or lower right

of print area using ESC T, otherwise, the vertical motion unit is used.

Differences:

None